17
ADJUSTMENTS
PIVOT ADJUSTMENTS
Note: These adjustments were made at the factory
and normally do not require readjustment.
TRAVEL PIVOT ADJUSTMENT
■
The saw arm should rise completely to the up
position by itself.
■
If the saw arm does not raise by itself or if there is
play in the pivot joints, have saw repaired by a
qualified service technician at your nearest Sears
store to avoid risk of personal injury.
DEPTH STOP
The depth stop limits the blade's downward travel. It
allows the blade to go below the miter table enough to
maintain full cutting capacities.
The depth stop is built in to provide maximum cutting
capacity for the 10 in. saw blade provided with your
saw.
APPLICATIONS
(Use only for the purposes listed below)
■
Cross cutting wood and plastic.
■
Cross cutting miters, joints, etc. for picture frames,
moldings, door casings, and fine joinery.
Note: The 104 tooth crosscut blade provided is fine
for most wood cutting operations, but for fine joinery
cuts or cutting plastic, use one of the accessory
blades available from your nearest Sears store.
WARNING:
Before starting any cutting
operation, clamp or bolt your miter saw to a
workbench. Never operate your miter saw on the
floor or in a crouched position. Failure to heed
this warning can result in serious personal injury.
Summary of Contents for 315.212400
Page 23: ...23 NOTES ...
