background image

3

CONGRATULATIONS 

on your purchase of a Sears

Craftsman high pressure washer. It has been desig-
ned, engineered and manufactured to give you the
best possible dependability and performance.

Should you experience any problems you cannot
easily remedy, please contact your nearest Sears
Service Center/Department. Sears has competent,
well trained technicians and the proper tools to service
or repair this unit.

Please read and retain this manual. The instructions
will enable you to assemble and maintain your sprayer
properly. Always observe the “SAFETY RULES”.

MODEL NUMBER:

559.741720

SERIAL NUMBER:

__________________

DATE OF PURCHASE:

__________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND
ON A DECAL ATTACHED TO THE HIGH PRESSURE
WASHER.

YOU SHOULD RECORD BOTH SERIAL NUMBER
AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring
for, and using your High Pressure Washer.

Follow the instructions under "Customer Respon-
sibilities" and "Storage" sections of this Owner´s
Manual.

ONE YEAR LIMITED WARRANTY ON CRAFTSMAN HIGH PRESSURE WASHER

For one year from the date of purchase, when this Craftsman High Pressure Washer is maintained an operated
according to the instructions in the owner’s manual, Sears will repair, free of charge, any defect in material and
workmanship.

If this Craftsman High Pressure Washer is used for commercial purposes, this warranty applies for only 90 days from
the date of purchase. If this Pressure Washer is used for rental purposes, this warranty applies for only 30 days from
the date of purchase.

This warranty does not cover:

Expendable items which become worn during normal use.

Repairs necessary because of operator abuse or negligence,including bent crankshafts and the failure to maintain

the

equipment according to the instructions contained in the owner´s manual.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE CARFTSMAN HIGH PRESSURE WASHER TO THE
NEAREST SERVICE CENTER/DEPARTMENT IN THE UNITED STATES. THIS WARRANTY APPLIES ONLY WHILE
THE PRODUCT IS IN USE IN THE UNITED STATES.

This warranty gives your specific legal rights, and you may also have other rights which vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, Hoffman Estates, IL. 60179

PRODUCT SPECIFICATIONS

HORSEPOWER

5 HP

GASOLINE  CAPACITY (unleaded)

0.37 US gal

GASOLINE  CONSUMPTION

0.48 US-gal/h

OIL (1.25 PINT CAPACITY) SAE 30

(above 32 °F)

SAE  5W-30(below 32 °F)

SPARK  PLUG (GAP .030 in)

Champion J19LM

RECOMMENDED  RPM idle

2000 rpm

under load

3100 rpm

TORQUE (MAX.) @ 2400 rpm

6.1 FT.- Lbs.

BORE

11

/

16

in.

STROKE

3

/

64

in.

DISPLACEMENT

11.57 cu. in.

OUTLET  PRESSURE

1750 psi

FLOW  RATE

2.5 gpm

DETERGENT  INTAKE

0.2 gpm

WATER  SUPPLY  TEMPERATURE  MAX.140 °F

SUCTION HEIGHT with cold water (50 °F)

3 ft.

LENGTH

18 

1

/

2

in

WIDTH

14 in

HEIGHT

36 in

WEIGHT (without accessories)

55 lbs

WARNING:

A spark arrester must be added to the muffler of this engine
if it is to be used on any forest covered, brush covered or
grass covered unimproved land. The arrester must be maintai-
ned in effective working order by the operator.
In the State of California the above is required by law
(Section 4442 of the California Public Resources Code).
Other states may have similar laws. Federal laws apply on
federal lands. A spark arrester for the muffler is available
through your nearest Sears authorized service center.

Summary of Contents for 1750





















Reviews: