9
ASSEMBLY
ATTACHING SIDE DISCHARGE COVER
Use the supplied nuts, bolts, and user-supplied 10 mm wrench to assemble the side
discharge chute to the mower deck (Figure 5).
Torque:
1.1–1.3 ft-lb (1.5–1.8 Nm)
CUTTING HEIGHT ADJUSTMENT
The cutting height can be adjusted to 3 different positions.
Cutting Height
• Top Hole: 1.4 in (35mm) ± 0.2 in. (5 mm)
• Middle Hole: 2.3 in. (58mm) ± 0.2 in. (5 mm)
• Bottom Hole: 3.1 in. (80mm) ± 0.2 in. (5 mm)
Use a 13mm wrench to remove the nut from the axle pin. Install the wheel to the
desired cutting height position (Figure 6). Reinstall the axle pin and nut.
IMPORTANT:
All 4 wheels must be adjusted equally.
Torque:
7.4–8.93 ft-lb (10–12 Nm)
Figure 5
Figure 6
