background image

10 ― English

ASSEMBLY

      WARNING:

 If any parts are broken or 

missing, do not attempt to attach the battery 

pack or operate the tool until the broken or 

missing parts are replaced. Failure to do so 

could result in possible serious injury.

   

      WARNING: 

Do not attempt to 

modify this tool or create accessories not 

recommended for use with this tool. Any such 

alteration or modification is misuse and could 

result in a hazardous condition leading to 

possible serious injury.

UNPACKING

This product requires assembly.
■ Carefully remove the product and any 

accessories from the box. Make sure 

that all items listed in the packing list are 

included.

       

WARNING: 

Do not use this product 

if any parts on the Packing List are already 

assembled to your product when you unpack 

it. Parts on this list are not assembled to the 

product by the manufacturer and require 

customer installation. Use of a product that 

may have been improperly assembled could 

result in serious personal injury.

■ Inspect the product carefully to make sure 

   no breakage or damage occurred during  

   shipping.

■ Do not discard the packing material until 

   you have carefully inspected and 

   satisfactorily operated the product.

■ If any parts are damaged or missing, do not 

   operate the product. Return it for 

   replacement to the retailer from which it 

   was purchased.

PACKING LIST

(1) 20V Cordless Circular Saw
(1) Circular Saw Blade
(1) Rip Fence
(1) Blade Wrench
(1) Operator's Manual

           

Summary of Contents for 125.46569

























Reviews: