Craftmade WCS-100, Installation Manual, Page: 15 / 28

Step 6 (continued)
The green light will continuously flash until the switch is
added to the Craftmade Smart App. If you need to start
the process again to add to the Craftmade Smart App,
you can depress the on/off paddle button for 5 seconds.
The green light will begin blinking again. When the light
stops blinking and stays solid the process has begun.
The light will not illuminate if wired incorrectly.
IF LIGHTS DO NOT TURN ON:
1. Check that power to the switch is on at the breaker.
2. Turn power off at the breaker, return to the switch
to confirm the wires are securely and properly
wired according to the instructions guide.