page 9
11. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Locate ON/OFF slider switch on wall
control and set to the ON position. Test fan speeds
with the different fan speed buttons. If the remote
control operates all of the functions of the fan,
battery has been installed correctly. If the wall
and/or remote controls do (does) not operate all of
the fan functions, refer to "Troubleshooting" section
to solve any issues before contacting Customer
Service.
Fan
must
be on LOW
before
setting the fan in
reverse. Use button to recirculate air depending
on the season. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
NOTE
: If the wall/remote control interferes with
other appliances, change code switches on the
wall/remote control to another code. If you do
change the code,
turn power off first
. After setting
the new code on the wall/remote control, go back to
the instructions in Section 10 (page 8).
IMPORTANT
: Remote and wall controls must be
synchronized with fan in order to properly function.
I
OFF
ON
II
III
IV
V
VI
I
II
IV
VI
III
V
reverse
reverse
Wall Control
Remote Control
