11
Step 11
First install Halogen Bulb by screwing bulb into socket. Install Light Kit
Assembly by aligning slots on light kit to dimples on Light Assembly
Housing. Turn glass clockwise to lock securely in place.
NOTE:
Hold fan motor housing while turning light kit/cover to ensure proper
installation.
Light Kit Assembly
Fluorescent Bulb
Fluorescent Bulb
CAUTION:
Handle bulb using the protective bulb covering provided as
touching the glass with fingers will reduce the life of the bulb.
10
Step 10
For blade assembly, position blade (7) through slot in fan motor housing
so that all screw holes are aligned (as shown in figure below). Position
light house assembly so that the top screw hole in blade lines up with
housing slot in flywheel. Using motor screws (S5), insert through blade
and into the fan motor. Tighten securely.
Remove rubber cushions, saving motor screws for blade installation. Using
motor screws (S5) provided, line up holes from the blade arm with the
holes in the motor housing. Tighten screws securely.
Light Assembly Housing
Motor Flywheel
Housing Slot
Fan Motor
Slot
Blade
Light Assembly
Housing
