Craftmade ELLINGTON PAP52ABZ5RCDI Installation Manual Download Page 10

g

y

page 9

WARNING: 

Failure to disconnect power supply 

prior to troubleshooting any wiring issues may 
result in serious injury.

Parts Replacement.

For parts and information, please refer to
"Parts Inventory" on page 2.
Craftmade/Ellington Customer Support:

1-800-486-4892

www.ellingtonfans.com

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely 
in either direction.
3. Check to be sure fan is wired properly.
4. Check that red light on remote control 
transmitter turns on when a button is pressed 
indicating that the battery is good.
5. Verify that receiver is wired properly. 
6. Be sure wall control is wired properly.
7. Learning process between fan, remote 
control transmitter and wall control may not 
have been successful and code was not 
activated. Turn off power and repeat 
instructions in last two paragraphs of Section 
9 (page 7).
 

Problem: 

Fan fails to operate with remote 

control and or wall control.

Solutions:

1. Check that red light on remote control 
transmitter turns on when a button is pressed 
indicating that the battery is good.
2. Learning process between fan, remote 
control transmitter and wall control may not 
have been successful and code was not 
activated. Turn off power and repeat 
instructions in last two paragraphs of Section 
9 (page 7).
 

Problem: 

Fan wobbles.

Solutions:

1. Use the balancing kit provided in one of 
the hardware packs. 

If no blade balancing kit is 

provided, please call Customer Support,
1-800-486-4892, to request one.

2. Check to be sure set screw(s) on motor 
housing yoke is (are) tightened securely.
3. Check to be sure set screw on hanging ball 
is tightened securely.

CRAFTMADE/ELLINGTON LIFETIME WARRANTY:
CRAFTMADE/ELLINGTON warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY: CRAFTMADE/ELLINGTON will replace 
or repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact 
Craftmade/Ellington Customer Service at 

1-800-486-4892

 

to arrange for return of fan. Return fan, shipping prepaid, to 
Craftmade/Ellington. We will repair or ship you a 
replacement fan, and we will pay the return shipping cost.
5-YEAR WARRANTY: CRAFTMADE/ELLINGTON will repair or 
replace at no charge to the original purchaser any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to 
Craftmade/Ellington. We will repair or ship purchaser a 
replacement motor and Craftmade/Ellington will pay the 
return shipping cost.
6-YEAR to LIFETIME LIMITED WARRANTY: 
CRAFTMADE/ELLINGTON will repair the fan, at no charge 
for labor only to the original purchaser, if the fan motor 
fails to operate satisfactorily when failure results from 
normal use. Parts used in the repair will be billed to the 
purchaser at prevailing prices at time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Craftmade/Ellington nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

Summary of Contents for ELLINGTON PAP52ABZ5RCDI











Reviews: