7
Place Flange Cover (7),
Downrod Accessory Distributor
(6), Upper Distributor Cover
(5), Canopy Cover (4) and
Canopy (3) over downrod
assembly.
Align and insert Decorative
Screws (10) through Downrod
Accessory arm (9) with the holes
of the distributor.
Align screws on lower downrod
accessory arm with slots in the
top of the fan housing (8).
Tighten all screws securely.
Replace hanging ball, insert hanging pin through downrod and tighten set screw
through hanging ball into downrod.
WARNING: Failure to completely tighten downrod as described in steps
above could result in the fan loosening and possibly falling.
