Step 8
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S6) are provided for
your convenience. If an additional blue wire is present then also connect
the blue wire to the black wire. (Optional light kit may be wired to
individual wall switches, if desired.)
2. After connections
are made, turn
splices upward
and push carefully
into outlet box.
Separate blue and
black wires on one
side of the box, and
white and green wires
on the other side.
There are 4 colored
wires coming from the
top of the motor
(including ground wire).
8
White (Neutral)
Ground
White
Black
Wire
Connectors
(S6)
Ground
(Green)
Blue
Black (Power)
Outlet Box
Ground (Green)
Wire Connections
Outlet Box
Fan Wires
Black
Black
(Hot Wire for Fan)
Green
Green
(Ground Wire)
White
White
(Neutral Wire)
Black
Blue
(Light Kit Wire)
Mounting Bracket
Ground (Green)
Downrod Ground
(Green)
9
Step 9
Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws
firmly.
Bottom of Canopy
Screws (S2)
Canopy (3)
Ceiling
10
Step 10
For blade assembly, position blade arm and blade (#5) so that all screw
holes are aligned (as shown in figure below). Using blade screws (S4),
insert through top of blade holder, through blade, and into blade
ornament. Tighten securely.
CAUTION:
Install blade holders to motor only after motor installation is complete. This will
prevent damage to the blade holders which have been carefully balanced.
IMPORTANT: Remove rubber cushions, saving motor screws for installation.
Blade Screws (S4)
Blade Arm (10)
Fan Motor
Blade (5)
Blade Holder
Screws (S6)