Craftex CX502, User Manual, Page: 4 / 17

4
MAKE SURE
the sander is connected
to the matched and specific power
source instructed in the manual.
ALL THE GUARDS
must be in place
while operating the sander to ensure
safety.
MAKE SURE
before making any
adjustments, the switch is in the “OFF”
position and the cord is un-plugged
from the power source.
DO NOT
wear loose clothing while
operating this sander.
KEEP YOUR WORK AREA CLEAN.
Cluttered areas and workbenches
increase the chance of accident.
KEEP CHILDREN AWAY
. All visitors
should be kept at a safe distance from
the work area.
NEVER LEAVE
the sander
unattended while it is running.
HOLD
the work-piece firmly against
the table when sanding.
DO NOT
force the sander. It will do the
job better and will be safer at the
operating rate for which it is designed.
ALWAYS
wear dust mask and safety
glasses while operating the sander.
The tiny pieces of dust produced by
the sander can cause serious health
problems.
ALWAYS
inspect stock for staples,
nails knots or any other foreign
material before sanding.
ALWAYS
operate the sander in a well
ventilated area and use a dust
collection system for dust removal
whenever possible.
MAINTAIN AND SERVICE
your
sander regularly as instructed in the
user manual.
MAKE SURE
you have read and
understood all the safety instructions
in the manual and you are familiar with
your CX502 sander, before operating
it. If you fail to do so, serious injury
could occur.
CX502 OSCILLATING VERTICAL SPINDLE SANDER
SPECIFIC SAFETY INSTRUCTIONS
WARNING
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.