CT109 – FINISH NAILER
CLEARING A JAMMED FASTNER
WARNING
– Disconnect from air/power supply before attempting to clear a jammed
fastner.
•
Open magazine and clear any remaining fastners (WARNING: fastners are under
spring tension and may shoot out)
•
Grasp nose cover on both sides and pull outwards until pin disengages from the latch,
then pull upwards so the fastner guide plate swings away from the magazine.
•
Use long nose pliers to remove the jammed fastner.
•
Close the fasnter guide plate, hook the pin latch and snap nose cover shut.
The exhaust deflector can be positioned to point in any direction (Full 360° movement)
Reposition deflector by grasping firmly and rotating the desired position.
6
Summary of Contents for CT109
Page 1: ...OWNER S MANUAL CT109 FINISH NAILER ...
Page 9: ...9 ...
