CRAFFT CFW145T Instruction Manual Download Page 10

10

Reserved Washing

• 

Reservation can be made from 2 hours to 48hours.

example) To make reservation to complete washing in 8hours.

• 

Now the reservation is mode.

• 

WOOL course is not selected.

• 

The displaying time shows the finishing time you want.

REMAIN

close
the lid

REMAIN

adjust to
the course
you want.

MIN./TIME

MIN./TIME

REMAIN

REMAIN

select "8"

"--" shall blink

WASH TIME CONTROL

 As the control button is pressed, wash time will be repeated as

 First, you have to adjust to the Spin process by pressing process button three times.

 First, you have to adjust to the Rinse process by pressing process button two times.

 First, you have to adjust to the Wash process by pressing process button one time.

following;

18 

➝ 

➝ 

➝ 

10

➝ 

14min.

 If you don’t want wash process, you must adjust wash time to 0 min.

RINSE TIMES CONTROL

 As the control button is pressed, Rinse time will be repeated as

following;

2 Rinse 

➝ 

3 Rinse 

➝ 

4 Rinse 

➝ 

0 Rinse 

➝ 

1 Rinse 

 If you don’t want Rinse process, you must adjust Rinse times to 0 times.

SPIN TIME CONTROL 

 As the control button is pressed, spin time will be repeated as following;

➝ 

➝ 

➝ 

3min.

 If you don’t want spin process, you must adjust spin time to 0 min.

PARTIAL PROCESS & COMBINATION

CONVINIENT OPERATION FOR SPIN ONLY

• 

If you want spin only, it is convinient to operate

the button as following.

NOTE

 If you open the Door(Lid) When wash and rinse processing, the PULSATOR is not working

with "LE" signal on the PCB and Buzzer alarm.

 And if close the Door(Lid), the remain process will be done continuously.

Summary of Contents for CFW145T


















Reviews: