ACTIVE GPS: -PWD MODELS
The IBR600XX-XX-PWD now come with an active GPS
connection at 3.3V and 100mA max.
For full functionality you will need to purchase an
active GPS antenna separately. The -PWD models
include only one WiFi antenna for operation in 1x1
WiFi mode.
UPDATING FIRMWARE
Cradlepoint regularly creates new firmware packages.
You may need to update firmware to use the IBR600
with new modems and to access our latest features.
1.
Log into the administration pages. You may have
changed the Administrator Password when you
used the First Time Setup Wizard.
2.
Select ‘System > System Control’ on the left
navigation bar, then ‘System Software’ in the
dropdown menu.
3.
Find the ‘Firmware Upgrade’ section. This displays
the current firmware version that is installed and
indicates if updated firmware is available.
4.
Click ‘Automatic (Internet)’ if new firmware is
available. The IBR600 will download and install the
firmware and automatically reboot itself. A status
monitor will appear and indicate when this process
is complete. This process may take several minutes
depending on your Internet connection speed.
If your device does not have an active Internet
connection, you need to download the latest firmware
from
cradlepoint.com/firmware
to your desktop. Then
use the ‘Manual Firmware Upload’ option.
ROUTER COMMUNICATION /
DATA USAGE
The factory default configuration of the router is set
to communicate with Cradlepoint and other resources
at regular intervals to access the latest firmware
and modem updates, clock synchronization (NTP),
and Enterprise Cloud Manager (ECM) membership.
Such communication may result in data usage and
applicable charges regardless of whether the router
uses a wired or wireless Internet connection. To avoid
such data usage and potential charges, consult the
following Knowledge Base article:
knowledgebase.cradlepoint.com/articles/Support/
Router-Communication-Data-Usage
Quick Start Guide
/
COR IBR600 Series
©2005-2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
4