©Cradlepoint. All Rights Reserved.
Part Number: 170743-000
GETTING STARTED
1.
Insert an active SIM and power up the COR IBR200.
2.
Wait for the device to connect. The device will
require a connection to a network through a cellular
SIM or through WiFi-as-WAN. If the device does not
establish a cellular connection within 60 seconds
or will utilize WiFi-as-WAN, you may need to make
configuration changes directly in NetCloud OS. If
needed, follow the instructions to the right to log
into NetCloud OS.
Connection Indicator:
3.
Log into NetCloud Manager. If you’re managing this
device, you’re ready to log into NetCloud Manager.
Open a browser to
cradlepointecm.com
and log in
with the credentials received by email with your
account information. If you’re not managing this
device, you’re done.
For more setup instructions, visit
cradlepoint.com/ibr200
.
Deploy and Manage the Intelligent
Network with Cradlepoint NetCloud
Your new device now comes with a
subscription to NetCloud Manager.
NetCloud Manager is a network management
application that helps businesses deploy,
configure, and collect actionable intelligence
about any registered device. It also includes SD-
WAN capabilities, like policy and orchestration,
to enhance the security and scalability of your
network and business operations.
Explore everything you can do with NetCloud
Manager. Visit
cradlepoint.com/netcloud
or call
our Sales & Support team:
+
1 855-813-3385
Router Communication / Data Usage
The factory default configuration of the router is set to communicate with Cradlepoint and other resources at regular intervals to access the latest
NetCloud OS and modem updates, clock synchronization (NTP), and NetCloud Manager membership. Such communication may result in data usage
and applicable charges regardless of whether the router uses a wired or wireless Internet connection. To avoid such data usage and potential charges,
consult the following Knowledge Base article:
http://knowledgebase.cradlepoint.com/articles/Support/router-communication-data-usage
Logging into NetCloud OS
1.
Connect to the router via
Ethernet or WiFi.
2.
Open the browser, type “cp/” or
“
192.168.0.1
” and press enter.
3.
Enter the eight-digit
Administrator password found
on the product label.
4.
Upon first-time login, you’ll
automatically be directed to
the First Time Setup Wizard.
Cellular connected
200-qsg-2pgr-112017.indd 2
11/21/17 4:06 PM
