www.cr-gps.com
Page 13 of 20
Revision: V2.0.1-January 2016
and the
black cable is negative; Please ground the positive pole separately or ground it to
ground connection, not to any other ground.
The white cable is to realize function of control the power/oil, connect it to 86
port(refer to the yellow cable of the plug of relay) of relay, and fix the relay where is
waterproof and water can't splash, or using a plastic bag to wrap up the relay
■
4.3 Relay wiring
Relay wiring diagram shows how to wire the relay to control the start motor:
4.3.1 Way to connect a relay:
●Connect the 85 terminal(yellow cable) to the positive pole of the vehicle power
(+12V/+24V).
●Connect the 86 terminal (white cable) to the white cable (ARM output) of the main
harness.
●Cut off the positive pole of the START MOTOR, next serial connect the positive
pole to the 30 terminal(green cable) of the relay, and connect another pole to 87a
terminal(green cable), showing as in the figure.