2
Index
Page
PA Overview
Installation Instructions
3
- Mounting
- Wiring
-
Backplate Diagram
Operation
4
- Operating
- Resetting
Specification
Push Buttons
Front Cover
Indicator
Backplate
Key Reset Hole
Page 1: ...1 CQR PADP2 SS G1 Rev 1 ...
Page 2: ...Page PA Overview 2 Installation Instructions 3 Mounting 3 Wiring 3 Backplate Diagram 3 Operation 4 Operating 4 Resetting 4 Specification 4 PA Overview Push Buttons Front Cover Indicator Backplate Key Reset Hole ...
Page 3: ...le through the access holes in the rear of the Backplate Connect control panel PA zone circuit to the two reed switch terminals inside the PA Button not polarity conscious as shown below Refit cover to PA Backplate Backplate Diagram Note Three extra terminals are provided for terminating other circuit wires Connect wiring to Control Panel PA circuit zone Mounting holes Extra Terminals ...
Page 4: ...dicator will show Yellow Remove key Note Remove key from PA button whilst not in use and store carefully Specification Operation Double Push Material ABS Switch Reed NO NC Configuration Both Terminals 5 Tamper None Reset Latch Indicator Yes Backlit No Max Voltage 50v DC Max Current 500mA Security Grade 1 Environmental Class II Dimensions w x h x d mm 62 x 75 x 30 ...
