CPV Act1, Manual, Page: 4 / 27

Act1 Electrofusion Welder
06/06/2011
www.ProcessPipes.co.uk Pg 4
Safety Notes
•
RISK OF EXPLOSION!
This welding unit must not be used in a gaseous atmosphere.
•
RISK OF ELECTRIC SHOCK!
Do not open. No user serviceable parts inside.
•
Before using, always visually inspect the unit to see that the cables and connectors are not
worn or damaged. Replace the damaged part before welding.
•
Switch off and remove the plug from the mains before adjusting, cleaning, or if the cables
are entangled and before leaving the equipment unattended for any period.
•
To avoid damaging the unit, do not interrupt the supply voltage or disconnect the welding
cable, while the unit is welding a fitting.
•
Do not lift or pull the equipment by its cables.
•
Do not disconnect the welding cables by pulling on them, always pull off the connectors
from the fitting.
•
Do not start a weld without the pipe correctly inserted into the fitting.
•
Do not touch the fitting while welding.
•
Do not weld in the rain or leave the equipment outdoors whilst it is raining.
•
Weld only in daylight or in good artificial light.
•
The operator is responsible for accidents or hazards occurring to other people or their
property while using this equipment. Keep the work area safe!
•
Keep bystanders a safe distance away from the machine while welding.
•
Never allow people unfamiliar with these instructions to use the welding unit.
!