Press and hold the
〔
〕
key on the top of the unit.
Press and hold the
〔
〕
key until the letter CH is blinking, press
〔
〕
key to select
the number of Channel.
Press
〔
〕
key and the screen will display CTC off , press
〔
〕
key to select your
desired CTCSS/DCS ( CTCSS 1 – 53, DCS 1 – 104 )
Press
〔
〕
key to complete this setting or to press
〔
〕
key again to have the other
functions , press
〔
〕
key to select Yes or No of the functions, you may press
〔
〕
key at any time to complete this setting.
SL001 ...............................
Uo off ...............................
dc off ................................
bP
on ...............................
bc
on ................................
Po Hi ........................................
Rgoff ................................
bL on ................................
rS
off ................................
Press
〔
〕
key at the side and
〔
〕
key at the same time to LOCK /UNLOCK the unit,
after Lock, the unit can only be allowed to adjust volume or transmit and receive.
6.1
【
Power On / Off
】
To turn the radio on or off, press and hold the power on
〔
〕
key .
6.2
【
Volume
】
Adjust the volume level by using
〔
〕
key (16 steps, default 8)
6.3
【
Transmission
】
Press and hold the
〔
〕
key while speaking at about 5cm from the microphone for
transmission. Release the
〔
〕
key to return to standby mode.
6.4
【
Reception
】
Listen for activity on the selected channel.
6.5
【
Monitor
】
Press
〔
〕
key and
〔
〕
key simultaneously to select MONITOR ON / OFF.
6.6
【
Scan
】
Press
〔
〕
key and
〔
〕
key simultaneously to select SCAN ON / OFF
6.7
【
Key Lock
】
Press
〔
〕
key and
〔
〕
key simultaneously to select Key Lock ON / OFF
5.
CHANNEL SETTING BRIEF NOTE
6.
OPERATION
Power out
VOX
Voice
Activated Transmission
Dual
Watch
Beep Sound
Back
light
blinking
Reset
Busy
Channel
Lock Out
Roger
Beep
Tone
Squelch Level
ENGL
IS
H
