19
4.1
To install the battery
1. Align the top of the battery (belt-clip end) with the radio’s battery compartment and
guide rails.
2. Slide the battery towards the top of the radio until the battery is fully engaged
by the latch with a “click” sound.
4.2
To remove the battery
1. After the radio has been switched off, disengage the battery latch by pushing and
holding it towards the front of the radio.
2. With the latch disengaged, slide the battery down until it can be entirely removed from
the radio.
4.3
To charge the battery
1. Plug the AC-to-DC Adaptor into the appropriate AC power outlet.
2. Connect the DC jack of AC-to-DC Adaptor to desktop charger.
3. Turn off the radio.
4. Insert the radio (with battery) into the charging tray (! Make sure the radio is off).
5. When the radio with battery is fully inserted, a glowing red light indicates that the
battery
is charging.
6. Green light indicates the charging is completed and radio is ready for use.
4.4
Charging Status Indicators
Red LED light on
Charging
Green LED light on
Charging completed
Red LED blinking
Short circuit / Battery problem / Over charged
Green LED blinking
Over heating
Red & Green LEDs blinking
Loose contact
4. BATTERY
