Powerhead
Collection Cup
O-Ring
(around cup)
Bio-Bale
(not shown)
Page 1: ...ing around the collection cup and insert the collection cup assembly into the skimmer chamber 4 Stand the whole unit in the sump portion of your system The SR3 requires at least a space measuring 8 5 x 3 with the pump in place Fill the body with water until it is no longer buoyant and position the skimmer into place 5 A small amount of Bio Bale media should be placed down the last chamber of the S...
Page 2: ...at the O ring is intact Be sure not to break or bend the two clips which hold the plate in place No waste collecting in collection cup The collection cup is not low enough See instructions for the correct height of the collection cup The biological load may not be sufficient enough to generate significant waste A new tank or a tank with supplemental filtration may produce limited waste and skimmat...
Page 3: ... the flat portion to the locking guide Pull the base plate straight away from the powerhead as the impeller may be attached to it 4 Wash all parts under warm tap water Do not use any detergents Make sure that the air nipple and the air line is clear of any foreign matter calcium buildup or salt creep before reassembling 5 Reassemble the powerheads and place them back on your SR3 protein skimmer SR...
Page 4: ...Powerhead Collection Cup O Ring around cup Bio Bale not shown ...
