![background image](http://html.mh-extra.com/html/cpi/gtr-50/gtr-50_service-manual_2675041038.webp)
CPI MOTOR
ELECTRIC SYSTEM GTR50
《
10-2
》
IGNITION COIL INSPECTION
Check the primary coil for continuity.
Mark connections with an ohmmeter as shown.
The coil is normal if there is continuity.
STANDARD: 0.1
∼
1.0
Ω
( 20
℃
)
Check the secondary coil for continuity.
The ignite coil is correct if there is continuity.
STANDSRD:
With plug cap: 7
∼
12 k
Ω
No plug cap : 3
∼
5 k
Ω
Check the coil output on a ignition coil tester.
Set the tester to ignition test, dial out the electrodes
and observe the spark gap.
GOOD: Continuous spark.
NG: Discontinuous spark
NOTE:
Follow the instructions supplied with the
tester.