By: Champlain Plastics Inc.
87 Pillsbury Road, Rouses Point, NY 12979
INS-197-rev4E
www.champlainplastics.com
09-2019
ACM-197, ACM-197C
Skimmer Cover Plate with Ultra Bright LED Light
By: Champlain Plastics Inc.
87 Pillsbury Road, Rouses Point, NY 12979
INS-197-rev4E
www.champlainplastics.com
09-2019
• Risk of electrical shock, if instructions are not followed. Connect only to a grounded GFCI outlet that is a
minimum of 10 feet (3 m) away from the pool.
DO NOT USE EXTENSION CORDS.
• Do not let children use this device unsupervised.
• For use on permanent above-ground pools only.
• Do not use the light if the lens, transformer or cord is damaged.
WINTER STORAGE: Freezing weather may damage light fixture. Disconnect light and remove from the pool.
Store in dry space at room temperature.
WARNING
MAX
MIN
TYPE OF INSTALLATION:
STEP 3
Tape template
securly in place.
STEP 4
Making sure that
center point is aligned,
carefully drill hole using a
20 mm hole saw.
STEP 1
Cut out template along dotted line.
5/8”
(1,588 cm)
7/8”
(2,223 cm)
20mm
hole
3-1/4” (8,255 cm)
5-1/8”
(13,018 cm)
TEMPLATE
(This side up)
STEP 2
Line template up with the top edge
of skimmer. The edge of the template
MUST
be flush with the side edge of the skimmer.
Template MUST
be flush with
edge of skimmer.
Align template
with top edge
of skimmer.
5/8”
(1,588 cm)
7/8”
(2,223 cm)
20mm hole
3-1/4” (8,255 cm)
5-1/8”
(13,018 cm)
TEMPLATE
(This side up)
FOR INSTALLATION
ON SKIMMER
WITH
PRE-DRILLED HOLE
FOR INSTALLATION
ON SKIMMER
WITHOUT
PRE-DRILLED HOLE
INSTRUCTIONS
FOR
DRILLING HOLE
INTO SKIMMER WITHOUT
PRE-DRILLED HOLE
INSTRUCTIONS FOR
DRILLING HOLE
INTO SKIMMER
WITHOUT PRE-DRILLED HOLE
NOTE: Operating and Pairing Remote with Pool Lights Instructions
included with ACM-197C only.
TOOLS NEEDED
20mm
MAX
MIN
A
C
B
C
Remove template
and follow instructions
for installation
of skimmer light (A)
5/8”
(1,588 cm)
7/8”
(2,223 cm)
20mm hole
3-1/4” (8,255 cm)
5-1/8”
(13,018 cm)
TEMPLATE
(This side up)
20mm
