• Risk of electrical shock, if instructions are not followed. Connect only to a
grounded GFCI outlet that is a minimum of 10 feet (3 m) away from the pool.
DO NOT USE EXTENSION CORDS.
• Do not let children use this device unsupervised.
• For use on permanent above-ground pools only.
• Do not use the light if the lens, transformer or cord is damaged.
WINTER STORAGE: Freezing weather may damage light fixture. Disconnect
light and remove from the pool. Store in dry space at room temperature.
WARNING
INSTALLATION
(cont’d)
:
POOL STEP
and
WALL
STEP 3
Insert the plastic
washer.
STEP 4
Secure the light from
behind with the plastic nut.
DO
NOT OVER TIGHTEN.
STEP 5
Secure plastic nut
with the safety cap and 2
supplied screws.
NOTE:
Operating and Pairing
Remote Control with Pool Lights
instructions included
with ACM-125C only.
STEP 3
STEP 6
STEP 4
STEP 5
Underside of pool step or
exterior wall of pool
STEP 6
(Step installation only)
Install steps
in pool (follow STEPS Instructions).
Attach the electrical cord to the step.
STEP 7
Make sure the transformer
(A)
is out of the water. Slide plastic O-ring
(B) onto transformer plug. Insert pins
into transformer outlet and secure with
cap. The transformer should be plugged
into a GFCI outlet.
STEP 7
(A)
(A)
(B)
By: Champlain Plastics Inc.
87 Pillsbury Road, Rouses Point, NY 12979
INS-ACM125-rev3E
www.champlainplastics.com
09-2019
ACM-125 & ACM-125C
Universal Pool Light
