![background image](http://html1.mh-extra.com/html/cpi/1-2m-ku-band-rx/1-2m-ku-band-rx_assembly-manual_2675000010.webp)
4096-630
CPI Satcom & Antenna Technologies
1.2M Ku-BAND Rx/Tx SERIES 1132
9
2.2
FEED SUPPORT ASSEMBLY
NOTE:
These instructions are intended as a general reference for feed
support assembly. If your antenna system has specific feed support
installation instructions, then refer to them at this time.
CAUTION: During the assembly procedure, the sequence of instructions
must be followed. DO NOT TIGHTEN ANY HARDWARE UNTIL
INSTRUCTED. Refer to the feed support parts list and steps.
FEED SUPPORT PARTS LIST - TABLE 2.2
ITEM NO.
PART NO.
DESCRIPTION
QTY
1
VARIES
Feed Rod
2
2
VARIES
Feed Support Tube
1
3
8031-008
3
4
8031-026
1
5
8201-041
8
6
8202-041
4
7
8101-009
4
5 / 16” x 1.00” Bolt
5 / 16” x 3.25” Bolt
5 / 16” Flatwasher
5 / 16” Lock Washer
5 / 16” Hex Nut