10
ENGLISH
100361
1 . Assemble the crank on to the hose reel as shown .
2 . Secure with the crank screw .
1 . Inspect threaded female connector on hose reel,
confirm that rubber O-ring is properly seated .
To remove hose reel from wall cradle:
1 . Turn off water at house water spicket .
2 . Unscrew leader hose from water spicket (leader hose
connects the hose reel to the house spicket) .
3 . Unwind hose from hose reel .
4 . Unscrew garden hose from hose reel .
5 . Unlatch two lower clips .
6 . Lift hose reel upward and out to remove from cradle
system .
For re-installation, follow instructions in reverse .
Crank Assembly
Attach the Leader Hose
Moving or Storing the Hose Reel
Freezing temperatures can damage your hose
and watering accessories . Always disconnect the
connector hose and drain the water from the hose
prior to freezing conditions .
nOTICE
Prior to removing the hose reel for winter or moving
the hose reel to a new location, always disconnect
the connector hose and drain the water from the
hoses before storing or moving .
nOTICE
2 . Connect threaded male connector end of leader hose
to threaded female fitting on hose reel spool .
3 . Tighten by hand until snug (clockwise) .
4 . With adjustable pliers or wrench tighten fully .
ASSEMBLY
