CPcam IR-CAM-C, User Manual, Page: 12 / 15

WALKING TEST
WALKING TEST
After PIR Camera is properly installed, the walking test can be proceeded according to the following:
A. Apply the power and wait for 30 sec. for PIR Camera to warm up…Check video output.
B. Walk across the detection Zones at normal speed. The video and alarm control signal will be
triggered when PIR detects a movement.
WALKING TEST
WALKING TEST
After PIR Camera is properly installed, the walking test can be proceeded according to the following:
A. Apply the power and wait for 30 sec. for PIR Camera to warm up…Check video output.
B. Walk across the detection Zones at normal speed. The video and alarm control signal will be
triggered when PIR detects a movement.
9
9