48
4.1.3.4.1.
PPPoE
PPPoE interface is shown as in
Figure 4.24
➢
To Enable disable PPPoE.
➢
Input “
User Name
” and “
Password
” you get from your ISP (Internet service provider).
➢
Click save button, you need to restart to activate your configuration.
➢
After rebooting, DVR (WITHOUT HDD) will connect to internet automatically. The IP in the
PPPoE is the DVR (WITHOUT HDD) dynamic value. You can access this IP to access DVR
(WITHOUT HDD) from WAN network.
4.1.3.4.2.
NTP
PPPoE interface is shown as in
Figure 4.25
➢
[Enable]
To enable or disable NTP Service.
➢
[Server Address]
Input NTP Server IP address.
➢
[Port]
The default NTP port 123, the port settings can be based on actual NTP server.
➢
[Update cycle]
NTP server check interval, the default is 10 minutes.
Summary of Contents for Indigo JRC-27F
Page 1: ...DVR WITHOUT HDD User s Manual Version 1 01...
Page 106: ...100 Figure 5 29 Figure 5 30...
Page 109: ...103 Figure 5 32 Figure 5 33...
