CP Plus Indigo JRC-27F User Manual Download

Page: 112 / 140

106

Figure 5.36

Please refer to the following sheet for detailed information.

Parameter

Function

Enable

You need to check the box to enable/disable tampering function. Please
select a channel from the dropdown list.

Period

Tampering function becomes activated in the specified periods. See
Figure 5.35.

There are six periods in one day. Please draw a circle to enable
corresponding period.

Click OK button, system goes back to Tampering interface; please click
save button to exit.

Interval

System only memorizes one event during the anti-dither period. The
value ranges from 5s to 600s.

Sensitivity

There are six levels. The sixth level has the highest sensitivity.

Summary of Contents for Indigo JRC-27F













































































































































Search results

Summary of Contents for Indigo JRC-27F

Reviews:

Related manuals for Indigo JRC-27F

Brands by name

Popular brands

CP Plus Indigo JRC-27F, User Manual

Search results

Summary of Contents for Indigo JRC-27F

Reviews:

Related manuals for Indigo JRC-27F

Brands by name

Popular brands