CP Electronics DD-LCDHS, Product Manual, Page: 3 / 8

3
IR cmd Description Default Products
Time Mins 10 seconds to 99 minutes time delay (select 0 for 10 second delay – use for commis-
sioning only). All
Sens on Sensitivity level when the detector is already operational adjustable between 1 (min.)
and 9 (max.) Product
dependant
All
Sens off Sensitivity level for switching the detector on – adjustable between 1 (min.) and 9
(max.). Product
dependant
All
Range m Set the detectors‟ range in metres (0-999m) 8 MWS7 only
Power Up On Select No for a 30 second delay on start up. If Yes is selected, there will be no delay on
start up and the detector will always power up detecting. Y All
Walk test If set, walk test mode will flash the internal LED when occupancy is detected N All
Disable Det Disables detection, leaving the relay output permanently off with the dimming output
operational. This mode is used when the unit is for maintained illuminance only. N All
Factory default Restores factory default settings
Use with caution
All
Menus
The final column for each menu section shows which products can programmed with specific parameters.
4. Detector Parameter Menu