Use and Care Manual
Wellness for Home
04/05
ASSEMBLY
Notes:
•
Place the chair on a level surface.
•
Do not keep the chair in a place with high humidity like a bathroom.
•
Do not keep the chair in a place where it will be exposed to direct sunshine for an extended
period, or in a place near a heater where the temperature may reaches high levels.
at lease 32"
at lease 32"
at lease 24"
Corner
W
all
Step 1.
Lay a carpet, etc. on the set-up place.
It prevents damaging the floor, and mutes the noise during using the chair.
Step 2.
Ensure there is sufficient space to allow the chair to recline and lift.
In order not to touch the wall or other things when reclined and lifted, allow the clearance of 32”
from the back to the wall and 24” from foot rest to the wall. See blow images for better
understanding.
Step 3.
Check the fabric of the chair
Prior to use, make sure there are no tears. If a tear is found obtain service, do not use the
chair.
Step 4.
Check the power cord
Check that there is neither breakage nor damage to the power adaptor.
Check that the cords are not caught or placed beneath the chair.
Step 5.
How to connect the power source
1) Connect the power adaptor with the chair
2) Insert the power plug into an outlet
Step 6.
Battery Installation
Your mobility seating is equipped with a battery backup system that will activate during a power
failure. the backup system is powered by four 9V batteries (not included)
Notice:
Always make sure the battery box is equipped with four fresh 9V batteries since the
battery backup system does not recharge itself.In the case of a power failure, the backup battery
may not lift the user a fully raised position.
4x9V
