Engage the joint of the footrest actuator and footrest. Then join them together with the bolt and lock with the cotter
pin. As pictured below.
Caution: The bolt must be inserted right-to left and the flat side must be up .
Open box 3 and remove the packing material on the top. Take out the footrest and the speaker unit.
3
Take off three cotter pins and three bolts, put them aside the chair. Then move footrest close to the chair.
4
Move the footrest close to the chair. Zip the zipper to join the two fabrics together. As pictured below.
6
7
Connect footrest wire connectors and attach the connectors onto the front cover. Then connect the 4-way air hose. As
pictured below.
Caution: One wire connector has a cap. After the connector has been connected the cap must
be screwed.
5
