Vehicle belt + ISOFIX installation
Applicable to vehicles equipped with an ISOFIX system that meets the requirements of ECE R14
1). Find the ISOFIX anchor point on the vehicle, and clip the two guide sleeves on to the
two ISOFIX anchor points of the car to aid installation (if needed).
2). Press and hold the ISOFIX unlock button while sliding outwards to fully extended the ISOFIX
connectors on both sides of the child car seat.
3). Connect the ISOFIX connector of the child car seat to the ISOFIX anchor point of the vehicle
until you hear a "click" sound. The indicators will turn green.
4). Push the child car seat back towards the vehicle seat until it’s firmly pressed against
the back of the vehicle seat.
Gently keep pressure on the hooks to ensure they stay
hooked to the base as you lift the backrest up.
The backrest will “CLICK” into position.
DO NOT FORCE AS THIS MAY CAUSE DAMAGE.
Lift the cover flap up and attach it to the velcro
on the backrest, located underneath the backrest cover.
The backrest cover will now hang in-front of this.
To install the cup holder locate the slot on
the side that will NOT be next to the vehicle door.
Push the cup holder’s peg through the slot
and insert it into the groove.
09
10