5.3 Seat for semi-universal installation for (Group 2 +3)
Semi-universal installation of the child restraint system is only
possible on car seats fitted with ISOFIX anchors. With the aid of the ISOFIX
connectors, the seat can be securely fastened to the body of the vehicle
by using these ISOFIX anchor points.
For the approved vehicles and seat positions suitable for the installation of the
seat, please refer to section 12 Fit List. Fit List of applicable models.
5.4 Seat for ISOFIX-universal installation for (Group 1)
ISOFIX-universal installation of the child restraint system is only
possible on car seats fitted with ISOFIX anchors and top tether anchor.
With the aid of the ISOFIX connectors and top tether anchor, the seat can
be securely fastened to the body of the vehicle by using these ISOFIX
anchor points and top tether anchor point.
6. Installation in the vehicle
6.1 Installation for Group 0+ : rearward facing installation in vehicle with
3 point belt.
Important:
If the vehicle buckle has interference with child seat, then please try in another seat.
If the seat still does not fit then please contact our customer service department if you
are in any doubt.
Always use the rear seats of your vehicle even if your highway code and vehicle
hand book permits use on the front seat. Check your highway code as this regulation
may vary according to the country
.
It is better to assemble your seat on the side of the pavement or on a drive way
.
i
Warning: Airbags can cause injury. Do not use this child seat on a
passenger seat fitted with a frontal airbag.
13
Summary of Contents for Arthur EST-528
Page 1: ......
