2.Place the
Back Grille
against
the motor housing ,insert the
two upper
Buckles
into the
Buckle Holes
, then slide them
down to the small holes with a
little force.
Align the bottom buckle with
the screw hole, then tighten the
Screw
to secure the
Back Grille
to the motor .
Figure 10
3.Remove the plastic sleeve from the motor
shaft. Loosen the
screw
at the back of
the Fan Blade,and slide the
Fan Blade
onto
the motor shaft.
Figure 11
.
4.Retighten the
Screw
on the blade assembly
to secure it to the motor shaft. Make sure that
the end of the screw is positioned within the
flat notch on the shaft.
Figure 12
.
Figure 10.
Figure 12.
7
Buckles
Figure 11.
Blade screw
Front side
