Sayfa 8/15
Place on the ground the machine with adjustable leg in type by adjusting its legs, for fixed
the devices with fixed leg, by smoothing the ground.
There must be sufficient ventilation in the area, where you operate the device.
Place your device 10 cm away from the surfaces not heat resistant and the wall.
7. PRE-INSPECTIONS TO BE PERFORMED FOR START UP
Be sure that appropriate gas is used.
Be sure that there isn’t any leakage on the gas connection of the device.
Read the instruction manual absolutely
8.
START UP
On the figures in gas control section, the figures of control panels existing on the device
have been shown. According to these figures, check whether or not gas connection have
been made exactly and correctly, as mentioned earlier.
Because Control switches existing on the device are graded, we can provide any cooking in
power we desire. (FIGURE 2)
9.
GAS CONTROL
SERİES 700-900
Figure 2
1- Gas Switch
F
igure 2
