1. Back Length
2. Neck Girth
3. Chest Girth
4. Abdomen Girth with the fastener
2.
Back Length
Neck
Girth
Chest
Girth
Abdomen
Girth
1
2
3
4
Sizing Information
NOTE:
When unpacking please be sure to remove both the Silica Gel Sachet and the
Mould Tablet. These are used for product protection during transportation.
WARNING!
Despite our best efforts to eliminate any threads before sending the
product, there may be an instance where a small thread was missed. This is rare but does
not affect the integrity or function of the product if you could possibly cut it off as close
to the seam as possible to prevent any unravelling.
Fitting the coat to your dog is very simple.
1. Open the Coat out.
2. Place it over the Dog with the Hood towards the head.
3. Tighten the front fastener around the chest.
4. Pull the lower strap under the stomach and tighten.
5. If desired raise the hood to cover the head area.
6. Removal is a reversal of the fitting procedure.
Using your Quick Drying Coat
Fitting Advice
