The Bed has a non-slip base
and a removable cover.
MATERIAL:
COVER - Outer edge of cover:
100% Polyester
Inner area of cover:
70% nylon, 30% polyester
GEL PAD - Cover: Polyester
Gel: 94.95% Water, 5.0% Sodium
Carboxymethylcellulose,
0.05% 5-Chloro-2-methyl-2H-
isothiazol-3-one
Medium
Large
Extra Large
120cm
79cm
67cm
90cm
105cm
93cm
48cm
44cm
70cm
37cm
60cm
75cm
Using your CP Cooling Pet Bed
NOTE:
When unpacking please be sure to remove
both the Silica Gel Sachet and the Mould Tablet. These
are used for product protection during transportation.
WARNING:
Despite our best efforts to eliminate any threads before sending the
product, there may be an instance where a small thread was missed. This is rare but does
not affect the integrity or function of the product if you could possibly cut it off as close
to the seam as possible to prevent any unravelling.
General Advice
The outer cover is constructed of polyester and nylon with a soft polyester filling, so
there is no toxic risk should your furry friend decide to try and eat his new bed. However,
you should be aware of the risk of a blockage in the intestine if too much is ingested.
Additionally, as with all beds of this type you need to check frequently that your dog is
not chewing the Gel Pad. Should you notice any chewing we recommend the Gel Pad is
removed. Whilst these are not constructed of toxic materials ingesting the contents may
cause stomach upsets and diarrhoea. Other issues may occur, but this is unusual.
2.
