background image

Congratulations on the purchase of this versatile, handy, stylish, light 
and easy-care Stool. It enhances any room that it is used in. The pads 
on the legs prevent damage to your floor surfaces.

Fig 1 – Base of Stool 
Showing Screw Locations  

Fig 4 – Legs Assembled 
Showing Fixing 
Screw Location       

Fig 5 – Locations of Fixing 
Screws into Stool Base

Fig 2 – Stool Legs

Fig 3 – M6 
Allen Key 
5 x M6 x 50mm 
Hex Screws

Assembly Instructions

Welcome

Assembling 

1.  Assemble the Legs as shown in Fig 2 & 4 using 1 M6 x 50 mm Hex 

Screw in location A.

2.  Place the Leg Assembly onto the Base of the Stool and secure it using 

the four remaining M6 x 50mm screws in locations B, C, D and E 

  (See Fig 5).
3.  Check the four screws are adequately tight but do not use excessive 

force.

4.  Assembly is now complete. Enjoy your new stool!

Care and Cleaning 

Your Stool requires no more care than any other similar piece of 
furniture. However, it is good practice to clean it with a vacuum cleaner 
on a weekly basis using a crevice tool to remove any debris that has 
fallen down the sides.

Any marks can be removed by 

Spot Cleaning

. The general procedure 

for this is shown below.

1.  Use a dull knife to remove any solid matter from the fibres. Do not rub 

the stain deeper into the fabric.

2. Use a white cloth or paper towels to blot up as much moisture as 

possible.

3. Follow stain removal tips for specific stains to avoid making the 

situation worse.

4.  Work from the edge of the stain toward the centre to avoid spreading 

the stain.

5.  Use as little cleaning product and moisture as possible.
6.  Avoid direct heat when drying. Gentle air drying is almost always best.

Reviews: