Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 663 / 866

Enabling/Disabling VLB Health Check Probes
Enable/Disable VLB Health Check Probes in the GUI
VLB probes are enabled as soon as a health check instance is added to a server instance in a
server pool. Default settings for probe parameters are used unless specifically set on the Health
Check Configuration screen.
Health checks can be disabled by checking the disable option on the Add Health Check screen as
shown on
"Configuring VLB Health Check Probe Parameters"
on page 664
Note - Health checks cannot be globally disabled and must be disabled for each health check.
Enable/Disable VLB Health Check Probes in the CLI
VLB probes are enabled as soon as a health check instance is added to a server instance in a
server pool. Default settings for probe parameters are used unless specifically configured on
eqcli >
.
Health checks can be disabled by entering the following in each server instance context:
eqcli >srvpool sp-spname si siname no hci hci-name
where:
sp
-
spname
is the name of the server pool
si
-
siname
is the name of the server instance in the server pool
hci
-
name
is the name of the health check instance
Note - Health checks cannot be globally disabled and must be disabled for each health check instance.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 663
Equalizer Administration Guide