17
mode key will blink twice to confirm your selec-
tion. Then you’ll need to program device control (see
Programming Device Control
on page 9).
ChanGInG VOlUMe lOCK
The Cox-Universal Remote Control is set to control volume
of a device through your TV while in TV, DVD, or Cable
mode. However, in the Auxiliary mode, you will still have
separate control of of your auxiliary device’s volume.
If your TV is not remote-controllable, or if you would
like the volume to be controlled by a different device, you
can change the Volume Lock setting to control a volume
through a non-associated mode (for example, through the
cable in the TV mode).
To change Volume lock to Cable mode:
1.
On the remote control, press
Cable
once.
Then press and hold
seTUP
until the
Cable
key blinks twice, then release
seTUP
.
2.
Enter
9 - 9 - 3
. The
Cable
key will blink twice.
3.
Press
Cable
once. It will blink twice.
4.
Now, whenever you press
VOl+
,
VOl–,
or
MUTe
, volume will be controlled by your
Cable Converter.
To change Volume lock to TV mode:
1.
On the remote control, press
TV
once.
Then press and hold
seTUP
until the
TV
key
blinks twice, then release
seTUP
.
2.
Enter
9 - 9 - 3
. The
TV
key will blink twice.
3.
Press
TV
once. It will blink twice.
4.
Now, whenever you press
VOl+
,
VOl–
, or
MUTe
, volume will be controlled by your TV.
To change Volume lock to aUX mode:
NOTE: Performing these steps will allow you to access
the volume control of your auxiliary device in all modes.
1.
On the remote control, press
aUX
once.
Then press and hold
seTUP
until the
aUX
key blinks twice, then release
seTUP
.
2.
Enter
9 - 9 - 3
. The
aUX
key will blink twice.
3.
Press
aUX
once. It will blink twice.
M7820BP1.indd 17
3/13/2007 3:54:01 PM