COX EC80, User Manual

Page: 38 / 44

Real-time Monitoring
April 2019 CXX-UM-03060-EN-01 Page 38
The Bus ID information displays in the lower left corner of the main screen
Figure 34: Bus ID information
To address an individual flow processor:
1 Click on the
Current Bus ID # field
2 Change the value to correspond with the meter to be addressed
3 Click the
Upload icon on the toolbar of the main GUI screen
The profile from the flow processor you addressed then populates the software
interface with the information stored in that particular flow processor
4 (Optional) Click the Download icon to place another flow processor’s profile
into the currently selected flow processor
REAL-TIME MONITORING
The EC80 Flow Processor outputs
real-time values via the established RS485
communication Parameters and variables
can be viewed in the Status section of the
IFC15 GUI The Status screen displays the
item (variable), the numerical value, the
engineering unit, and, if applicable, the
number of counts associated with that
particular variable
You can select which parameters to view in
the options menu under the Report Display
tab See “Report Display” on page 43 for more
information The Report Display is programmed
from the factory to display a core group of
variables More variables can be applied to the
report format
The status display is shown in
Figure 35 ;
however it is necessary to follow the
instructions in “Real-Time Report Display” to
establish real-time update of the selected
variables
Figure 35: Status section