Profile
April 2019
CXX-UM-03060-EN-01
Page 22
Establish Link Via Ethernet
If the flow processor in use is capable of Ethernet communication you can connect
to the PC with an ethernet cable
To establish communications:
1 Check the
Use TCP/IP
box
2 Type the
IP Address
for the connected flow processor
3 View the Status area for connection info
PROFILE
A profile is all the information that is programmed into the software, including
Linearization tables, liquid properties, input and output settings, and others You
can use a profile to program the EC80 Flow Processor You can also upload a profile
from a previously programmed flow processor, save a profile for later use and copy
a profile
The following sections describe how to work with profiles
Creating, Saving and Loading Profiles
New
Save
Open
Figure 11: New, Load and Save buttons
Create a new profile by going to
File>New
or clicking the New button on the
toolbar Save a new profile by selecting
File>Save As
and then choosing a save
location and filename You can quickly save the file later by selecting
File>Save
,
or clicking the Save button on the toolbar Open a previously saved profile by
selecting
File>Open
, or clicking the Open button on the toolbar
Uploading a Profile
You can upload an existing profile from the EC80 Flow Processor and save it under
a different filename, then manipulate the data, yet still retrieve the old data if
necessary
IMPORTANT
Always keep an OEM copy (original) of the profile, in case you want to restore the
factory configuration.
1 Click the
Upload
button in the toolbar of the main GUI screen This retrieves
the profile currently stored in the flow processor (if previously downloaded)
and places all profile data from the flow processor in the GUI
2 Click the
File
menu
3 Click
Save As
