Cowon CX7, User Manual

Page: 10 / 11

10
COWON CX7
+ Precautions
_ Reset to Dual Mode (When the L and R unist are not connecting to each other)
Delete connected device
& Turn off Bluetooth
Power Off
Hold for 10 seconds
and release
Release when the LED
turns blue
Connection
Delete the [CX7 Bluetooth]
device registered on your
smartphone or other
Bluetooth device and turn
off Bluetooth.
Remove the earphones from
the cradle and turn off both
L and R units.
Press and hold the
left and right buttons
simultaneously for 10
seconds. Then release them.
Insert the earphones into the
charging cradle and check if
the earphone LED is on. Then
remove the left and right
earphones from the charging
cradle at the same time. Once
reset, the L unit will enter
pairing mode, and its LED will
flash white and blue.
Turn on Bluetooth on
your smartphone or other
Bluetooth device and
select [CX7 Bluetooth]
from the detected devices
to complete pairing and
automatically connect.
* Refer to page 'Pairing & Connection' when connecting the product to a smart device for the first time.
* If the L and R units only connect in single mode during normal dual-mode operation, reset to dual mode by following the instructions below.
*
If it fails to reset, start again from Step ②.
Off
00:04 00:04
Off Off
00:10 00:10
L R
CX7 Bluetooth
1 2 3 4 5