Product Descriptions
seat is occupied. The sea
t sensor is located between 3 & 5 o’clock on the
toilet seat.
Soft Close Seat & Lid
Hydraulic dampers installed at the hinges allow the seat and lid to close softly.
Antibacterial Plastic
The Bidet is made with antibacterial plastic to ensure the highest degree of
hygiene & cleanliness.
Power Saving
The Bidet senses when it is not occupied and will automatically go into “power
save mode”. This function can be turned off and on.
Water Saving
An average wash uses about a tea cup or two of water.
Quick Release
This bidet has a quick release base plate on the bottom of the bidet to enable
this bidet to be fitted to toilets that have access to seat bolts and toilets that
are fully concealed. With the press of 1 or 2 buttons you can slide the bidet
toward the front of the toilet for easy removal.
Requirements
You must ensure that you have a tap on the wall, a powerpoint within 1.5 metres of the toilet & a
plumber to complete your installation.
This bidet has a quick release base plate on the bottom of the bidet to enable this bidet to be fitted to
toilets that have access to seat bolts and toilets that are fully concealed.
NOTE: You will need to know if your tap is located on the LHS, RHS or in your cistern when
looking at your toilet. You will also need to know if you have access to the seat bolts. This
knowledge is required as extra accessories for installation may need to be purchased.
NOTE: If being installed on a fully concealed toilet - Top Fixing Bolts must be purchased
separately.
Additional products that may be required:
- If TAP is on RHS -
1m of ¼” White Pipe and 1x Elbow Kit is required
- If TAP is in the Cistern -
½” Internal Fitting Kit and 1x Elbow Kit is required
- If installed on a bottom fixing toilet with arms/rails & 80mm spacer - Extension Brackets are
required
‐
If installed on a top fixing toilet - Top Fixing Bolts are required
‐
If installed on a top fixing toilet with a 50mm spacer - Extra Long Top Fixing Bolts are required
‐
If installed on a top fixing toilet with Arms/Rails - Top Fixing Bolts are required
‐
If installed on a top fixing toilet with a 50mm Spacer and Arms/Rails - Extra Long Top Fixing
Bolts are required
‐
If installed on a top fixing toilet with an 80mm Spacer - Extra Long Top Fixing Bolts &
Stabilisers are required
‐
If installed on a top fixing toilet with an 80mm Spacer & Arms/Rails - Extra Long Top Fixing
Bolts, Stabilisers and Extension Brackets are required
