English
10
9
BEFORE USE
3. Reattach the front cover.
Push to reattach the front cover into the two slots on the sides of the purifier.
∗
If the front cover is not properly attached, the product will not operate.
FRONT/전면/前
▶
How to install filter
Please check before use
The product is for 220V-240V~50Hz/60Hz.
Make sure to connect the power plug to a grounded electric outlet
(220V-240V~50Hz/60Hz) dedicated to the product.
- Be sure to install the filter after removing the plastic packaging.
- Only use it indoors.
- When not in use, remove the power plug from the socket.
- During filter assembly, check the front of the filters.
▶
Filter assembly order : HEPA filter
→
deodorization filter
→
fine dust filter
→
pre-filter
Tips
1. Open the front cover.
Pull both sides of the front cover to open.
2. Take out the filter and remove
the plastic packaging.
Remove the plastic packaging from filters,
excluding the Pre-filter, and assemble them
in the purifier in order.
Install the fine dust filter behind the Pre-filter.
∗
Filter assembly order : HEPA filter
→
deodorization filter
→
fine dust filter
→
pre-filter
∗
When you assemble the fine dust filter, be sure that the blue side of the filter must be at the front.
Summary of Contents for AP-1516D
Page 9: ...English User manual 8 7 Components...
Page 25: ...English 24 23 MEMO...
