Troubleshooting
8-4
Operator’s Manual
Manage Alarms and Alarm Limits
, p. 4-10, for any issues related to alarm
conditions.
8.4
Return
Contact Covidien or a local Covidien representative for shipping instructions, includ-
ing a Returned Goods Authorization (RGA) number. Reference
p. 1-6. Unless otherwise instructed by Covidien, it is not necessary to return the
sensor or other accessory items with the monitoring system. Pack the monitoring
system in its original shipping carton. If the original carton is not available, use a suit-
able carton with the appropriate packing material to protect it during shipping.
Return the monitoring system by any shipping method that provides proof of deliv-
ery.
Data port does not function
properly
Ensure USB cable firmly connected.
Disconnect USB cable, reset system power, then reconnect.
Ensure baud rate settings for both monitoring system and PC are the same.
Check hardware tab in PC 'System Registration Information'; verify normal status.
Check COM port.
Re-install the bridge driver provided by Covidien.
Experiencing EMI interference
Reducing EMI (Electromagnetic Interference)
Technical System Error
Do not use the monitoring system; contact a qualified service technician or Covi-
dien Technical Services.
Table 8-1.
Common Problems and Resolutions (Continued)
Problem
Resolution
Summary of Contents for Nellcor Series
