Support 1.800.635.5267
41
PM100N Home Use Guide
To Clean the Monitoring System
Use any of the following to clean the monitoring
system:
•
A soft cloth dampened with tap water, isopropyl
alcohol, or a 10% bleach solution (ask your clinician)
•
A pre-moistened wipe (ask your clinician)
1. Remove the sensor from the patient and turn off
the monitoring system.
2. Dampen a soft cloth with tap water, isopropyl
alcohol, or a 10% bleach solution. If you are not
sure how to make the solution, ask your clinician. If
the cloth becomes soaked with liquid, start again
with a dry cloth.
Or, use a pre-moistened wipe recommended by
your clinician.
3. Gently wipe all surfaces of the monitoring system.
4. Allow the monitoring system to dry.
WARNING - Do not spray, pour, or spill any liquid on
the monitoring system, its accessories, connectors,
switches, or openings in the chassis, since this may
cause damage to the monitoring system.
