Covidien Nellcor OxiMax N-600x, Operator'S Manual

Page: 70 / 146

Managing Oximetry Data
64
Operator’s Manual
To view pulse rate trend display
1. With the oximeter in the normal monitoring mode, press the TREND softkey.
2. Press the MONITR softkey.
3. Press the VIEW softkey.
4. Press the PULSE softkey. The pulse rate trend data displays.
Figure 50. BPM Pulse Trend Data Display Screen, 1 hour trend
To view pulse amplitude trend data display
The pulse amplitude trend data display shows the amplitude of the patient’s pulse
rate over the period of time indicated on the display. Refer
To select the trend data
display scale , page 65 to setup the desired trend data scale.
1. With the oximeter in the normal monitoring mode, press the TREND softkey.
2. Press the MONITR softkey.
3. Press the VIEW softkey.
4. Press the NEXT softkey.
5. Press the AMP softkey. The pulse amplitude units (PAU) trend data displays.
Figure 51. Pulse Amplitude Trend Data Display Screen, 1 hour trend
The PAU reading (16 : 16) indicates the pulse amplitude units (upper and lower) at the
cursor position (dashed line). The cursor moves right or left using the ADJUST UP (right)
and ADJUST DOWN (left) keys.
To view histogram trend data display
The histogram displays trend data for the percent of oxygen blood saturation
(%SpO
2
) and pulse rate (BPM). The data displayed represents the trend data stored
over the period of time indicated on the display. Refer to To select the trend data
display scale , page 65, to set up the desired trend data scale. Pulse amplitude cannot
be displayed on the histogram display.