Covidien Nellcor OxiMax N-560, Service Manual

Page: 36 / 158

Performance Verification
26
7. The N-560
Pulse Amplitude
indicator will stabilize and illuminate 4
bars with each pulse beat.
8. The N-560 will display:
• 75 %SpO2
• 60 bpm
• alarm
• low level modulation
9. Perform
Test #1: BPM
on page 21. The
Pulse Amplitude
indicator
should indicate low level modulation.
10. Perform
Test #2: SpO2
on page 22. The
Pulse Amplitude
indicator
should indicate low level modulation.
11. Disconnect all equipment and turn off the N-560.
Safety Tests
The N-560 safety tests meet the standards of, and are performed in accordance
with, IEC 60601-1 (EN 60601-1, Amendment 1, Amendment 2) and UL
2601-1, for instruments classified as Class 1 and TYPE BF and ANSI/AAMI
Standard ES1.
Applicable tests for these standards are listed below. Technicians must be
familiar with the standards applicable to their institution and country. Test
equipment and its application must comply with the applicable standard.
• Ground Integrity, see page 92 for test values.
• Earth Leakage Current, see page 92 for test values.
• Enclosure Leakage Current, see page 92 for test values.
• Patient Applied Risk Current, see page 93 for test values.
• Patient Isolation Risk Current, see page 93 for test values.